Lakeland Cabinet Refacing
Crown Molding Addition in Lakeland, FL
Crown molding addition for Lakeland kitchens. Matched profiles, scribe-fit corners, finish-matched to cabinets. Free estimates.
Serving Lakeland and nearby communities.
Crown molding addition finishes off the top of a cabinet run, closing the gap between the cabinet face and the ceiling line and giving the kitchen a built-in, custom look. It's a popular add-on for a refacing job but works just as well as a standalone upgrade on cabinets that are already in good shape.
Lakeland kitchens built out through the 1990s and 2000s, especially in the south Lakeland subdivisions around Medulla and Lakeland Highlands, often have flat-top cabinet boxes with no molding at all. Lakeland Cabinet Refacing scribes each run to the actual ceiling line in that specific kitchen, since few ceilings run perfectly level, and matches the finish to either the existing cabinet color or new refacing work happening at the same time.
What's included
What's Included with Crown Molding Addition
Typically included: molding profile selection, measuring and cutting for the specific cabinet run, scribe-fitting to the ceiling, corner joints, and finish matching to existing or new cabinet color.
Optional: under-cabinet lighting channel cut into the molding, extended stacked molding for a taller profile, matching molding added to an island or peninsula.
Customer prep: clear the countertop and remove any items stored on top of upper cabinets before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Crown Molding Addition Process Works
Step 1Space Measurement
Cabinet tops are measured to determine molding length and angles needed.
Step 2Molding Style Selection
Clients choose molding profiles that complement their cabinet design.
Step 3Cutting and Fitting
Molding pieces are cut to precise angles for proper corner fitting.
Step 4Surface Preparation
Cabinet tops are prepared to ensure secure molding attachment.
Step 5Molding Installation
Molding is attached and secured along the tops of cabinet runs.
Step 6Finish Touch-Ups
Seams and edges are finished to blend molding with existing cabinetry.
Materials
Materials and Methods for Crown Molding Addition
Molding choice depends on the finish it needs to match and how it'll hold up over time in a Florida kitchen, where humidity can affect how wood moves at the seams.
Crown Molding Profiles
A range of molding profiles add decorative detail above cabinetry, from simple coved shapes to stacked traditional styles.
Wood Molding Strips
Solid wood strips provide a traditional, durable molding option that takes stain or paint evenly to match existing cabinet doors.
Molding Adhesive
Strong adhesive secures molding firmly to cabinet surfaces, reducing the chance of gaps opening as humidity shifts seasonally.
Finish Nails
Finish nails provide additional support for molding installation, especially on longer runs over wider cabinet spans.
Matching Stain or Paint
Finish is matched to existing cabinetry for a cohesive appearance whether the kitchen is staying natural wood or moving to a painted finish.
Corner Molding Blocks
Corner blocks simplify fitting at complex cabinet angles, common in L-shaped or U-shaped kitchen layouts.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Crown Molding Addition Take?
- 01
Stage 1
Most crown molding jobs are quick compared to a full refacing project, especially when the cabinets underneath are already finished and ready.
- 02
Measure and plan
same day - 03
Molding selection and ordering
2–4 days - 04
Cutting, fitting, and install
1 day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Crown Molding Addition
Always confirm with Polk County or the city of Lakeland if your project involves any structural changes beyond standard molding attachment.
| Typically needs a permit | Often no permit |
|---|---|
| No standard scenarios for a typical crown molding addition above cabinetry | Adding molding above existing cabinet runs |
| — | Scribe-fitting molding to an uneven ceiling line |
| — | Matching molding finish to existing or new cabinet color |
| — | Adding molding to an island or peninsula alongside cabinet runs |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Crown Molding Addition
| DIY | Hire a Pro |
|---|---|
| Simple straight-run molding on a single short cabinet section with a level ceiling. | Scribing molding to an uneven or out-of-level ceiling, which is common in older Lakeland-area homes. |
| Pre-primed stock molding from a home store for a low-traffic area. | Mitered corner joints on an L-shaped or U-shaped kitchen layout. |
| Basic butt joints where corner accuracy isn't critical to the overall look. | Matching finish color precisely to existing cabinets or new refacing work. |
Not sure DIY vs pro?
Get a Free EstimateCost
What Does a Crown Molding Addition Cost in Lakeland?
Price depends mostly on linear footage, the molding profile chosen, and how much finish-matching is needed to blend with existing cabinets. These are ballpark ranges, not a fixed quote. Call (863) 777-5234 or request a free estimate and we'll measure your actual cabinet runs.
| Project type | Typical range | What’s included |
|---|---|---|
| Simple single-run molding | $300–$800 | basic profile on one cabinet section with minimal corners. |
| Full kitchen perimeter molding | $800–$2,000 | standard profile across all upper cabinet runs with corner fitting. |
| Stacked or upgraded profile molding | $1,500–$3,500 | taller stacked design with premium finish matching. |
| Island or peninsula addition | $400–$1,000 | molding added to a standalone island to match the rest of the kitchen. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateWhen to call
When to Call for Crown Molding Addition
Call (863) 777-5234 or request a free estimate to get molding measured for your kitchen. <!-- rover-autofix-links -->
- You're already refacing cabinets and want a finished, built-in look at the ceiling line.
- Your current cabinets have a visible gap between the top and the ceiling.
- You recently had cabinets painted or refaced and the molding no longer matches.
- You want to add a stacked or upgraded profile for a more custom appearance.
- [Home](/)
- [Contact](/contact)
Seeing warning signs?
Get a Free EstimateNext step
Get a Crown Molding Addition Estimate in Lakeland
Call (863) 777-5234 or request a free estimate below. We'll measure your cabinet runs and give you a straight answer on scope and cost.
FAQs
Crown Molding Addition FAQs
How much does crown molding addition cost in Lakeland?
Most single-run jobs land between $300 and $800, while a full kitchen perimeter with corner fitting typically runs $800 to $2,000 depending on profile and finish matching.
Can crown molding be added without redoing the whole kitchen?
Yes. It works as a standalone upgrade on cabinets that are already in good shape, or as a finishing step added to a refacing project.
Will the molding match my existing cabinet finish?
We color-match the molding to your current cabinet stain or paint, or to the new finish if it's going on alongside a refacing job.
How long does installation take?
Cutting, fitting, and installing molding on a standard kitchen usually takes one day once the profile is selected and ordered.
Does crown molding work on an island?
Molding can be added to an island or peninsula to match the rest of the kitchen's cabinet runs.
Do I need a permit for crown molding addition?
Standard crown molding added above existing cabinetry doesn't require a permit. Confirm with Polk County or the city of Lakeland if your project involves other structural work.
Is DIY crown molding a good idea?
Simple, short, level-ceiling runs are reasonable to DIY. Scribing molding to an uneven ceiling or fitting mitered corners on an L-shaped kitchen is where a pro saves you from visible gaps and redo work.
More services
Other Cabinet Refacing services
Cabinet Refacing
Cabinet Refacing in Lakeland with matched doors, veneer boxes, and soft-close hardware. Free estimates, written scope.
Kitchen Cabinet Refacing
New doors, soft-close hardware, and humidity-ready veneer finishes over your existing kitchen boxes. Free estimates.
Bathroom Vanity Refacing
Bathroom Vanity Refacing in Lakeland with moisture-resistant finishes, new doors, matched drawer fronts. Free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.